Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

The front end.
Post Reply
s.kondratyuk
Posts: 4
Joined: Sun Sep 03, 2017 8:19 pm

Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

Post by s.kondratyuk »

Hello,

I would like to report a seeming problem with GeNIe 2.2. The following sequence of operations
results in a program crash:
1. Create three equation nodes: Node1, Node2 and Node3
2. Connect Node1 -> Node3, and Node2->Node3
3. Retain the default definitions of all nodes, wherein Node1=0,Node2=0 and Node3=Node1+Node2
4. Update network
5. View Node3 as Bar Chart.
This results in a crash. The specific values of Node1 and Node2 do not matter, any two constants would do. Other functions in the definition of Node3 will also lead to a crash. No similar crash happens if Node1 or Node2 are defined as, e.g., distributions.

Kind regards.
Sergiy Kondratyuk.
shooltz[BayesFusion]
Site Admin
Posts: 1417
Joined: Mon Nov 26, 2007 5:51 pm

Re: Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

Post by shooltz[BayesFusion] »

I can't reproduce the problem on my machine using the steps from your message. Are you using GeNIe 2.2.2028.x?
s.kondratyuk
Posts: 4
Joined: Sun Sep 03, 2017 8:19 pm

Re: Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

Post by s.kondratyuk »

Thank you for your reply. I am using Version 2.2.2028.2 (64-bit). Please note that this is a licensed copy.
Thanks again.
s.kondratyuk
Posts: 4
Joined: Sun Sep 03, 2017 8:19 pm

Re: Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

Post by s.kondratyuk »

Another qualification: after the steps described originally, please save the network, then open it again and update. This will produce a crash, on my version at least. Thanks.
shooltz[BayesFusion]
Site Admin
Posts: 1417
Joined: Mon Nov 26, 2007 5:51 pm

Re: Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

Post by shooltz[BayesFusion] »

Ok, we can reproduce the problem after the reload. The fix should be available soon.
shooltz[BayesFusion]
Site Admin
Posts: 1417
Joined: Mon Nov 26, 2007 5:51 pm

Re: Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

Post by shooltz[BayesFusion] »

The bug is fixed in GeNIe 2.2.2106.x, which is online now.
s.kondratyuk
Posts: 4
Joined: Sun Sep 03, 2017 8:19 pm

Re: Simple Equation-Based Network Crashes on Conversion of Node to Bar Chart

Post by s.kondratyuk »

Thank you very much!
Post Reply